Closet Door
Replacement Hardware
Help Page

Call Toll Free
(888) 915-5223

visit our main site

for complete door and cabinet hardware selection

Door Guides

Sliding Door
Flush Pulls

Passage/ Privacy Doors

Door Track
and Roller Sets
Pocket Door
Replacement Rollers
Keyed Locks
for Sliding Doors
Sliding Door

Closet Door Rollers

Mirrored Doors
Metal Frame Rollers
Metal Frame Guides
Bottom Rollers

Bi fold Doors
Hinges & Pivots
Guide Wheels


Closet Door Roller Terms


Sliding Wood Door Hardware

Offset Single Wheel

Normally Used
on Bi-Passing closet doors


Offset Double Wheel

Normally Used
on Bi-Passing closet doors

Center Hung Rollers

Normally Used on Pocket Doors

Mirrored Wardrobe Hardware


Bi-Fold Door Hardware



Bi Pass Rollers are normally offest
the back Door is spaced farther from centerline
to allow for a smaller track profile and minimal space between the doors

Many of these rollers will be offered as a specific roller for front and back
Bi-pass closet door.

Verify your offest and application before ordering.

offset closet door

Wheel Profiles

The bottom of the rollers can be different shapes to match the track profile
Some hangers are available with different shapes, verify you wheel and trck before ordering

Round Concave Square Champer
closet door wheel closet door wheel closet door wheel
Standard wheel used with hanging
Doors, Track will be rounded to
Accept wheel
Normally used with a bottom track.
track will have a raised profile
used in both hanging tracks with flat bottom
and as a bottom roller for flat tracks
Norally used in a multi-wheel
application. The wheel rolls on
the edges of the roller
closet door track closet door track door track

We offer the wide selection of rollers above.
To check against your roller: match up the screw holes, wheel size, overall bracket dimensions and any other holes or measurements listed from your assembly to the ones above.
In normal circumstances if the dimensions do not match the wheels will not work.

It is also very difficult to guess at a missing wheel based on track profile/size.
If you live in a tract home your neighbor may have the same setup so you can measure from his.

Some wheels are trapped and can not be removed. The easiest way to remove the old assembly is to cut approx. 3-4 inches of track and the end against the wall, this will allow the wheel to be taken out. The piece that was cut out can be screwed back up to complete the track.

We do offer complete units with track from PCHenderson , however, freight will be higher because of UPS limitations on package size. We do have them available for pick up at our location in Orange County California.

We keep a large selection of stock on hand. Most units ship same day via USPS Priority Mail and you receive them in 2-3 days.
Order the items above through our online shopping cart for the fastest service. Larger orders will ship UPS and have a slightly longer shipping time. Next day and Second day shipping options are available at a higher shipping cost.

All returns are subject to a 25% restocking fee, you must call for an RGA before shipping any returns


If you have any questions
ORDER TOLL FREE (888) 915-5223 ext 200

Woodward's Hardware
2343 N. Tustin Ave, Santa Ana, CA 92705
(714-541-5268 FAX (714)541-2123